Version 2.4.2.7 Audio Configuration Help

The migration to 2.4.2.7 changed the the way current volume levels, left-right (balance) relationships, and linking are set. Below are instructions to set the volume control and linking relationships for use with Rock-Ola's Red (6 button) volume control, IR wireless and new RF wireless remote controls. 

2-zone Mono or Stereo, balance centered, INT and EXT Buttons not linked. (Factory Default)

From the service console, go to:

  1. System Settings and Diagnostics Menu  

  2. Configure Audio Amplifier Menu  

  3. Configure Paid Selection Volume Menu  

  4. Set Paid Output Volume and Linkage Menu  

  5. Set all channel link options to “NONE”  

  6. Set all volume levels to midpoint (20)  

  7. Exit back 2 screens  

  8. Go to Configure Background Volume Menu  

  9. Set Background Output Volume Menu  

  10. Set all background volume levels to match paid levels  

  11. Exit back and return to Set paid output volume and linkage Menu  

  12. Link channel 2 to channel 1  

  13. Link channel 4 to channel 3  

2-zone Mono or Stereo, Left to Right balance offset, INT and EXT volume buttons not linked. 

From the service console, go to:  

  1. System Settings and Diagnostics Menu  

  2. Configure Audio Amplifier Menu
  3. Configure Paid Selection Volume Menu
  4. Set Paid Output Volume and Linkage Menu
  5. Set all channel link options to “NONE”
  6. Set all volume levels to midpoint (20)
  7. To adjust INTERNAL Balance, increase the ch 2 volume to increase the right channel. To bias to the left, increase the ch 1 volume by that amount.
  8. To adjust EXTERNAL Balance, increase the ch 4 volume to increase the right channel. To bias to the left, increase the ch 3 volume by that amount.
  9. Exit back 2 screens
  10. Go to Configure Background Volume Menu
  11. Set Background Output Volume Menu
  12. Set all background volume levels to match paid levels
  13. Exit back and return to Set paid output volume and linkage Menu
  14. Link channel 2 to channel 1
  15. Link channel 4 to channel 3

1-zone Mono or Stereo, balances centered, all speakers in the same room at the same volume level, INT and EXT Volume Buttons linked:

From the service console, go to:

  1. System Settings and Diagnostics Menu
  2. Configure Audio Amplifier Menu
  3. Configure Paid Selection Volume Menu
  4. Set Paid Output Volume and Linkage Menu
  5. Set all channel link options to “NONE”
  6. Set all volume levels to midpoint (20)
  7. Exit back 2 screens
  8. Go to Configure Background Volume Menu
  9. Set Background Output Volume Menu
  10. Set all background volume levels to match paid levels
  11. Exit back and return to Set paid output volume and linkage Menu
  12. Link channel 2 to channel 1
  13. Link channel 3 to channel 1
  14. Link channel 4 to channel 1

1-zone Mono or Stereo, balances centered, all speakers in the same room, with Internal and External speakers at different volume levels, INT and EXT Volume Buttons linked. 

From the service console, go to:

  1. System Settings and Diagnostics Menu
  2. Configure Audio Amplifier Menu
  3. Configure Paid Selection Volume Menu
  4. Set Paid Output Volume and Linkage Menu
  5. Set all channel link options to “NONE”
  6. Set all volume levels to midpoint (20)
  7. Adjust the volume levels for the desired balance between internal and external speakers (floor model) and/or between the speakers connected to each channel of the power amplifier (wall models).
  8. Exit back 2 screens
  9. Go to Configure Background Volume Menu
  10. Set Background Output Volume Menu
  11. Set all background volume levels to match paid levels
  12. Exit back and return to Set paid output volume and linkage Menu
  13. Link channel 2 to channel 1
  14. Link channel 3 to channel 1
  15. Link channel 4 to channel 1

 

  Back    Intro